A check engine light can also tell you that you have problems with the transmission including overheating, solenoid problems, speed sensors, slipping transmission and many other problems. Check Engine Light or Over Drive Light is onДЄ check engine light is not dedicated to the engine only.Have the vehicle checked for trouble codes to isolate the problem. If the vehicle has no or little power and the engine is running correctly, this could be from internal transmission problems, brakes that are dragging due to a faulty caliper or brake hose, or your computer in the vehicle is limiting power because of a problem it has detected in order to protect the engine. A buzzing could also come from a bad internal sealing surface, a seal, or low transmission fluid due to a leak. If there is buzzing, clunking, humming noiseДЄ buzzing, clicking, humming, roaring noise from inside the transmission is usually a symptom of a bad bearing, planetary gears damage, or other internal problem.Check your transmission dipstick as per the manufacturerвЂ™s direction for level and condition. If you catch the fluid leak quickly you might be able to save the transmission from damage. Note: not all transmission fluidВ is red and not all levels can be verified with a dipstick method, but require specials tools.ДЄ burning smell is typically caused by a fluid leak or in some cases by low fluid causing a burning clutch smell. Check your dipstick for proper fluid level and condition. This is not only bad for the transmission but is also dangerous if the fluid leaks on a hot pipe or other surface. Read more about common causes and signs for a slipping transmission.ДЄ red fluid under the vehicle is a sign that you probably have a transmission fluid leak from one of the cooler lines, a gasket or a seal. A high revving engine is a typical sign that you have worn clutches or other parts inside the transmission going bad. This condition can also be caused by low transmission fluid, contamination due to lack of maintenance or water intrusion, or internal wear and tear on the transmission parts inside the transmission.

Transmission slipping or engine is revving high.

Other possibilities could be an engine related problem that will cause the computer to not allow the transmission to shift into higher gears. While this may not sound serious, but this can also create an overheating condition that can damage internal transmission parts. If your transmission takes a while to go into gear, you may have a low transmission fluid condition because of a leak or contamination due to lack of maintenance or even water intrusion during off road or flooding conditions. Newer vehicles depend on the computer to tell the transmission when to go into gear based on your selection and you may need to have the computer system checked for trouble codes. If when you put your vehicle into gear and it wonвЂ™t move, this may be a problem with low transmission fluid due to a leak, the shifter, shifter cable, or it could even be a problem in the valve body of your automatic transmission.

Transmission wonвЂ™t engage or stay in gear.

You may be experiencing a problem with your transmission if your vehicle is exhibiting any of the following symptoms below: What sets us apart is our comprehensive diagnostic approach, along with the knowledge and expertise to pinpoint the root of your transmission issue.

Below are the tops reasons or signs that you may require transmission repair: The top signsВ why your transmission may be failing:ДЄAMCO is the most trusted name in transmission repair and has been for over 50 years. Are you currently hearing strange sounds or is there a peculiar smell coming from your vehicle? Is it handling differently than normal on the road? The most important thing is properly diagnosing the root cause of your vehicle's issue. So when it starts acting differently, you take notice. Top 10 reasons why your transmission may be failing Common Reasons For Transmission Problems.

Transmit mean